| Customization: | Available |
|---|---|
| Application: | Electronic |
| Type: | Voltage Transformer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The voltage transformer of the type JDJ(J)2-35 is single phase and oil-immersed product. It is used for electric energy metering, voltage control and relay protection in the electric system of rated frequency 50Hz or 60Hz and rated voltage 35Kv.
This voltage transformer has three poles and the iron core is made of silicon steel. The body is fixed on the box cover by clamps. There have the primary and secondary bushing also on the box cover. The oil is made of steel sheet by welding, there are earth studs and oil drain plug on lower part of box wall, and four mounting holes in the bottom.
1.The height above sea level is not above 1000m.(Please indicate height above sea level if it is used in highland area)
2.Max.change of environment temperature doesn't exceed 5 ºC to 40ºC.(If there is any requirement,please indicate in the order.)
3.Ordinary products can be used in the area with relative humidity not above 85%.
4.There is no gas,steam,chemical sedimentation,dust or dirt or other explosive and corrosive medium that seriously affect transformer at installation site.There is not serious vibration or bump.Either.
| Type | Rated voltage ratio | Accuracy level and rated output(VA) | Extreme output(VA) | Rated insulation level(VA) | ||||
| 0.2 | 0.5 | 1 | 0.2/0.2 0.2/0.5 |
6P | ||||
| JDJ2-35 | 35000/100 | 75 | 150 | 250 | / | / | 1000 | 40.5/95/200 |
){kind=link}